Climbing Technology Be Up belay device kit

Multiuse belay / abseil device with innovative and compact design (registered design), suitable for use with half, twin and single ropes for mountaineering, multi-pitch sport climbing and trad routes. Intuitive and easy to use, the BE UP has a modular braking system to optimise braking with all types of rope and allow the auto-locking and independent belaying of two seconds.

Hot forged light alloy HMS carabiner with screwgate, conceived for use in trad climbing, sport climbing and alpinism in general.

Extreme flexibility permits:

  • effective belaying of the leader. The particular shape of the BE UP‘s body allows rope to be paid out fluidly, rapidly and without jams;
  • while belaying the leader on a multipitch route using two ropes, the BE UP lets you pay out one rope while the other is locked-off, Be Up is the only such device that lets you do this;
  • effective, modular braking of the rope: the “V” notches are specially designed to guarantee better braking control when arresting a fall, abseiling or bringing up seconds;
  • the bringing-up of one or two seconds, with auto-locking and each second being belayed independently of the other (guide mode). The BE UP‘s special shape and the attachment ring built into the body allow you to bring up one or two seconds using twin or half ropes with Ø ≥ 7.3 mm. You can continue to bring-up one second while the other is hanging with their rope locked-off in the BE UP;
  • the unlocking of the rope and lowering of one free-hanging second, without difficulty, with twin or half Ø ≥ 7.3 mm ropes. BE UP is the only such device that lets you do this, simply by inserting a normal HMS carabiner in the unlocking hole;
  • rapidly switching from taking-in (guide mode) to belaying the leader, for leading through;
  • abseiling descents, keeping the ropes separate. The “V” notches allow you to effectively control the rate of descent, without twisting the ropes.


Features

  • light, extremely functional form, for the highest performance;
  • hot-forged body for strength;
  • attachment ring is part of body, easily identified to prevent errors of attachment;
  • plasticised steel cable, so you can‘t drop the BE UP and to limit its movement during belaying.
  • Made in Italy


Technical Specifications

  • Registered Design: ZL 201430507247.3
  • Twin/half rope: Ø 7.3 ÷ 9.0 mm
  • Single rope: Ø 8,5 to 10,5 mm
  • Complies with: EN 15151-2:2012 type 4
  • UIAA
  • Real weight: 86 g

Attention! Read carefully the device instructions before use.

Features

  • Especially recommended for use with belay devices.
  • Ample inside space for use with the Munter hitch and for rope maneuvers on the belay station.
  • Emphasized double T beam construction, for an optimal weight / strength ratio.
  • Light and shaped, for a better grip.
  • Catch-free nose avoids snagging when clipping and unclipping.
  • With ACL system to prevent cross loading.
  • Made in Italy.


Technical specifications

  • Dimensions: 105 x 73 mm
  • Major axle breaking load: 23 kN
  • Breaking load on minor axle: 10 kN
  • Breaking load with lever open: 7 kN
  • Maximum lever opening: 21 mm
  • EN 12275:2013-H
  • EN 362:2004-A/T
  • CE 0333
  • UIAA
  • ACL system
  • Catch-free closure
  • Real weight: 80 g